problème d'installation scanner epson
par jeanboot le 03/07/2008
Bonjour, je suis en échec total d'installation de mon scanner perfection 2480
Je suis sous Ubuntu depuis 1 semaines
Voici les messages que j'ai:
jeanboots@jeanboots-laptop:~$ sudo lsusb
[sudo] password for jeanboots:
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 04b8:0121 Seiko Epson Corp. Perfection 2480 Photo
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 05e3:0702 Genesys Logic, Inc. USB 2.0 IDE Adapter
Bus 001 Device 002: ID 058f:9254 Alcor Micro Corp. Hub
Bus 001 Device 001: ID 0000:0000
jeanboots@jeanboots-laptop:~$
jeanboots@jeanboots-laptop:~$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04b8 [EPSON], product=0x0121 [EPSON Scanner]) at libusb:002:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
jeanboots@jeanboots-laptop:~$ scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
jeanboots@jeanboots-laptop:~$ sudo gedit /etc/sane.d/dll.conf
# /etc/sane.d/dll.conf - Configuration file for the SANE dynamic backend loader
#
# On Debian systems, the dll backend will also look for pieces of configuration
# in the /etc/sane.d/dll.d directory -- packages providing backends should drop
# a config file similar to dll.conf in this directory.
epkowa
# enable the next line if you want to allow access through the network:
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
#canon_pp
cardscan
coolscan
coolscan2
#dc25
#dc210
#dc240
dell1600n_net
dmc
epjitsu
epson
#epson2
fujitsu
#gphoto2
genesys
gt68xx
hp
hp3900
hpsj5s
hp3500
hp4200
hp5400
hp5590
hpljm1005
hs2p
ibm
leo
lexmark
ma1509
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
pie
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
#------------------------------ General -----------------------------------
# Change to the fully qualified filename of your firmware file, if
# firmware upload is needed by the scanner
firmware /etc/sane.d/esfw41.bin
# If not automatically found you may manually specify a device name.
# For USB scanners also specify bus=usb, e.g.
# /dev/usb/scanner0 bus=usb
# For SCSI scanners specify the generic device, e.g. /dev/sg0 on Linux.
# /dev/sg0
#---------------------------------------------------------------------------
# No changes should be necessary below this line
#---------------------------------------------------------------------------
#-------------------------- SCSI scanners ----------------------------------
# These SCSI devices will be probed automatically
scsi AGFA * Scanner
scsi COLOR * Scanner
scsi Color * Scanner
scsi ACERPERI * Scanner
#--------------------------- USB scanners -----------------------------------
# These USB devices will be probed automatically
# (This will currently work only on Linux)
# Benq/Acer/Vuego 310U
usb 0x04a5 0x1a20
usb 0x04a5 0x1a26
# Benq/Acer/Vuego 320U
usb 0x04a5 0x2022
# Benq/Acer/Vuego 620U / 620UT
usb 0x04a5 0x1a2a
usb 0x04a5 0x2040
# Benq/Acer/Vuego 640U
usb 0x04a5 0x2060
# Benq/Acer/Vuego 640BU
usb 0x04a5 0x207e
# Benq/Acer/Vuego 640BT
usb 0x04a5 0x20be
# Benq/Acer/Vuego 1240U
usb 0x04a5 0x20c0
# Benq/Acer/Vuego 3300 / 4300
usb 0x04a5 0x20b0
# Benq/Acer/Vuego 4300
usb 0x04a5 0x20de
# Benq 5000E / 5000U
usb 0x04a5 0x20f8
# Benq 5000
usb 0x04a5 0x20fc
# Benq/Acer 5300
usb 0x04a5 0x20fe
# Benq 5250C
usb 0x04a5 0x2137
# Agfa 1236U
usb 0x06bd 0x0002
# Agfa 1212U
usb 0x06bd 0x0001
usb 0x06bd 0x2061
# Agfa Snapscan e10
usb 0x06bd 0x2093
# Agfa Snapscan e20
usb 0x06bd 0x2091
# Agfa Snapscan e25
usb 0x06bd 0x2095
# Agfa Snapscan e26
usb 0x06bd 0x2097
# Agfa Snapscan e40
usb 0x06bd 0x208d
# Agfa Snapscan e42
usb 0x06bd 0x20ff
# Agfa Snapscan e50
usb 0x06bd 0x208f
# Agfa Snapscan e52
usb 0x06bd 0x20fd
# Epson Perfection 660
usb 0x04b8 0x0114
# Epson Perfection 1670
usb 0x04b8 0x011f
# Epson Perfection 2480
usb 0x04b8 0x0110
# Epson Perfection 3490
usb 0x04b8 0x0122
# Epson Stylus CX-1500
usb 0x04b8 0x080c
voici les commandes que j'ai. Merci d'avance pour la néophyte que je suis
Re: problème d'installation scanner epson
par paul47 le 31/07/2008
certains scanners de Epson ne fonctionnent qu'avec les drivers fournis par Epson et ne se trouvent pas les bases de données des distributions...
par conséquent, aller chercher ici:
http://www.avasys.jp/lx-bin2/linux_e/scan/DL1.do
cocher le scanner voulu et télécharger le pilote iscan...
Par contre, il est possible que le pilote iscan entre en conflit avec libsane; d'autre part, renseigne toi comment on installe sous debian/ubuntu un .rpm; il faut je crois utiliser "allien"...
voilà
paul
